100391QC
Low Power Single Supply Hex TTL-to-PECL Translator

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

The 100391 is a hex translator for converting TTL logic levels to F100K PECL logic levels. The unique feature of this translator, is the ability to do this translation using only one +5V supply. The differential outputs allow each circuit to be used as an inverting/non-inverting translator, or as a differential line driver. A common enable (E), when LOW, holds all inverting outputs HIGH and all non-inverting inputs LOW.

The 100391 is ideal for those mixed PECL/TTL applications which only have +5V supply available. When used in the differential mode, the 100391, due to its high common mode rejection, overcomes voltage gradients between the TTL and PECL ground systems.

Storage Temperature (TSTG) .......−65°C to +150°C
Maximum Junction Temperature (TJ) ............+150°C
Pin Potential to Ground Pin (VCC) ....−0.5V to +7.0V
PECL Output Current
    (DC Output HIGH) ....................................−50 mA
TTL Input Voltage (Note 2)............... −0.5V to +7.0V
TTL Input Current (Note 2) .......−30 mA to + 5.0 mA
ESD (Last Passing Voltage)
(Note 3)...................................................... ≥2000V
●Operates from a single +5V supply
Differential PECL outputs
2000V ESD protection
Companion chip to 100390 hex PECL-to-TTL translator

100 OHM 0402 1 T Schottky Barrier Diodes (SBD) 100 OHM 0402 1 T-XPB CERAMIC CHIP/STANDARD
100 OHM 0402 5 T 2-Wire Serial EEPROM 100 OHM 0402 5 T-XPB SURFACE MOUNTING TYPE DIP SWITCH
100 OHM 0603 1 T 2-3W, Wide Input Range DIP, Single & Dual Output DC/DC Converters 100 OHM 0603 1 T-XPB NPN Silicon Power Darlington High Voltage Autoprotected
100 OHM 0603 5 T-XPB 128 Bit I 2 C? Bus Serial EEPROM 100 OHM 0805 1 T Capacitors for Power Factor Correction
100 OHM 0805 1 T-XPB 450 V/us, Precision, Current-Feedback Op Amp 100 OHM 0805 5 T
100 OHM 0805 5 T-XPB 3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER 100 OHM 1/16W 0402 5 GP YAGEO High Power Shielded Low Profile Surface Mount Inductors
100 OHM 1/16W 5 8P4R 0603 ARRAY RE 2.25 MHz 600 mA Step Down Converter in 2x2SON/TSOT-23 Package 100 OHM 1206 1 T RECTIFIER DIODE
100 OHM 1206 1 T-XPB 100 OHM 1206 5 T-XPB 4600T, S, K Series - Thin Film Conformal SIP
100 OHM 2512 5 T-XPB 100 UF 25V D HIGH FREQUENCY CERAMIC CAPACITORS
100.000AMHZ 12MHz Rail-to-Rail Buffers + 100mA VCOM Amplifier 100.000M SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

Datasheet

Size: 81.14KB
Page: 8
PDF: 100391QC.pdf
  • Description:
    Low Power Single Supply Hex TTL-to-PECL Translator
  • MFG:
    FAIRCHILD [Fairchild Semiconductor]
 

Abstract


? 2000 Fairchild Semiconductor Corporation DS010939 www.fairchildsemi.com
July 1992
Revised August 2000
1
00391 Low
Power Singl
e S
u
pply Hex
T
TL-t
o
-PECL T
r
ansl
at
or
100391
Low Power Single Supply Hex TTL-to-PECL Translator
General Description
The 100391 is a hex translator for converting TTL logic lev-
els to F100K PECL logic levels. The unique feature of this
translator, is the ability to do this translation using only one
+5V supply. The differential outputs allow each circuit to be
used as an inverting/non-inverting translator, or as a differ-
ential line driver. A common enable (E), when LOW, holds
all inverting outputs HIGH and all non-inverting inputs
LOW.
The 100391 is ideal for those mixed PECL/TTL applica-
tions which only have +5V supply available. When used in
the differential mode, the 100391, due to its high common
mode rejection, overcomes voltage gradients between the
TTL and PECL ground systems.
Features
a73 Operates from a single +5V supply
a73 Differential PECL outputs
a73 2000V ESD protection
a73 Companion chip to 100390 hex PECL-to-TTL translator

Ordering Code:
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagrams
24-Pin DIP and SOIC 28-Pin PLCC
Pin Descriptions
Order Number Package Number Package Description
100391SC M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
100391PC N24E 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide
100391QC V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square
100391QI V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square
Industrial Temperature Range (?40°C to +85°C)
Pin Names Description
D
0
- D
5
Data Inputs (TTL)
Q
0
- Q
5
Data Outputs (PECL)
Q
0
- Q
5
Inverting Data Outputs (PECL)
E Enable Input (TTL)

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.