ATMEGA103-6AC
8-bit Microcontroller with 128K Bytes In-System Programmable Flash

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

ATM-002 ATM02
ATM155MBDTRX 3.2Gbps, 4 Differential Channel, Serial Re-driver with Built-in Equalization & De-emphasis ATM168X
ATM2002PB1C Low Voltage Surface Mount 500 mW Avalanche Diodes ATM2101PBTC Tantalum Surface Mount Capacitor
ATM-2110 SMT Power Inductors ? DT1608 Series ATM2204BBIC 72-Mbit QDR⑩- II SRAM 4-Word Burst Architecture
ATM2205BBIC CMOS Voltage Detector ATM230V22F313212APGV Miniature Aluminum Electrolytic Capacitors
ATM24C512 Voltage Mode PWM Controller with EMI Reduction ATM27BV010-15TC (Can be used with low ESR Capacitor Compatible. ON-OFF Switch) High Speed LDO Regulators
ATM29F200AT-120SC/ 4K x 8 Dual-Port Static RAMs and 4K x 8 Dual-Port Static RAM with Semaphores ATM30V2.2 DUAL AUDIO OPERATIONAL AMPLIFIER / PREAMPLIFIER
ATM346 BriLux 1W Star Emitter ATM346N
ATM346R Black Surface Seven Segment Displays ATM356R FEMTOCLOCKS⑩ CRYSTAL-TO-LVCMOS/ LVTTL CLOCK GENERATOR
ATM36 2.0 1Gbit (128Mx8bit / 64Mx16bit) NAND Flash Memory ATM36 3.0 MirrorBit Flash Memory and DRAM

Datasheet

Size: 2184.93KB
Page: 141
PDF: ATMEGA103-6AC.pdf
  • Description:
    8-bit Microcontroller with 128K Bytes In-System Programmable Flash
  • MFG:
    ATMEL [ATMEL Corporation]
 

Abstract


1
Features
? Utilizes the AVR
?
RISC Architecture
AVR – High-performance and Low-power RISC Architecture
– 121 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers + Peripheral Control Registers
– Up to 6 MIPS Throughput at 6 MHz
Data and Nonvolatile Program Memory
– 128K Bytes of In-System Programmable Flash
Endurance: 1,000 Write/Erase Cycles
– 4K Bytes Internal SRAM
– 4K Bytes of In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
– SPI Interface for In-System Programming
Peripheral Features
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– Programmable Serial UART
– Master/Slave SPI Serial Interface
– Real-time Counter (RTC) with Separate Oscillator
– Two 8-bit Timer/Counters with Separate Prescaler and PWM
– Expanded 16-bit Timer/Counter System with Separate Prescaler, Compare,
Capture Modes and Dual 8-, 9-, or 10-bit PWM
– Programmable Watchdog Timer with On-chip Oscillator
– 8-channel, 10-bit ADC
Special Microcontroller Features
– Low-power Idle, Power-save and Power-down Modes
– Software Selectable Clock Frequency
– External and Internal Interrupt Sources
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
Power Consumption at 4 MHz, 3V, 25°C
– Active: 5.5 mA
– Idle Mode: 1.6 mA
– Power-down Mode: < 1 ?A
I/O and Packages
– 32 Programmable I/O Lines, 8 Output Lines, 8 Input Lines
– 64-lead TQFP
Operating Voltages
– 2.7 - 3.6V for ATmega103L
– 4.0 - 5.5V for ATmega103
Speed Grades
– 0 - 4 MHz for ATmega103L
– 0 - 6 MHz for ATmega103
8-bit
Microcontroller
with 128K Bytes
In-System
Programmable
Flash
ATmega103
ATmega103L
Note: Not recommended in new
designs.
Rev. 0945I–AVR–02/07

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.