ICL7107CPL
3 1/2 Digit, LCD/LED Display, A/D Converters

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

ICL/HIN232 Fiber Optic Multi-Channel Connectors ICL/HIN232ACB 8 to 12 Cell Li-Ion Battery Overcurrent Protection and Analog Front End Chip Set
ICL/TC7136CPL ICL/TCL7660CPA Industrial Potentiometer
ICL0475748 262,144-BIT DYNAMIC RANDOM-ACCESS MEMORIES ICL04858609AA DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS
ICL08332DR ICL100186KSL SOLID TANTALUM CHIP CAPACITORS
ICL1010CH Memory Card IC 256 bit OTP EPROM with Lock-Out ICL10485MTR CERAMIC MOLDED/AXIAL & RADIAL - STANDARD
ICL1082 4 & 5 Tumbler 1-4 Pole Switchlocks ICL1100 REGULATING PULSE WIDTH MODULATOR
ICL1112IL Push-Pull Output Sub-Microamp Comparators ICL1113IL 16M ( x 8/ x 16) FLASH MEMORY & 4M ( x 8/ x 16) STATIC RAM
ICL117G CIT SWITCH ICL1232 256M Double Data Rate Synchronous DRAM
ICL1388 ICL14433 ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS
ICL14433CPL 3.3V Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers ICL14433EPG 16-bit bus transceiver with direction pin; 30ohm series termination resistors; 5V Input/Outputs tolerant 3-State

Datasheet

Size: 534.33KB
Page: 16
PDF: ICL7107CPL.pdf
  • Description:
    3 1/2 Digit, LCD/LED Display, A/D Converters
  • MFG:
    INTERSIL [Intersil Corporation]
 

Abstract


1
?
FN3082.7
ICL7106, ICL7107, ICL7107S
3
1
/
2
Digit, LCD/LED Display, A/D
Converters
The Intersil ICL7106 and ICL7107 are high performance, low
power, 3
1
/
2
digit A/D converters. Included are seven
segment decoders, display drivers, a reference, and a clock.
The ICL7106 is designed to interface with a liquid crystal
display (LCD) and includes a multiplexed backplane drive;
the ICL7107 will directly drive an instrument size light
emitting diode (LED) display.
The ICL7106 and ICL7107 bring together a combination of
high accuracy, versatility, and true economy. It features auto-
zero to less than 10?V, zero drift of less than 1?V/
o
C, input
bias current of 10pA (Max), and rollover error of less than
one count. True differential inputs and reference are useful in
all systems, but give the designer an uncommon advantage
when measuring load cells, strain gauges and other bridge
type transducers. Finally, the true economy of single power
supply operation (ICL7106), enables a high performance
panel meter to be built with the addition of only 10 passive
components and a display.
Features
? Guaranteed Zero Reading for 0V Input on All Scales
True Polarity at Zero for Precise Null Detection
1pA Typical Input Current
True Differential Input and Reference, Direct Display Drive
- LCD ICL7106, LED lCL7107
Low Noise - Less Than 15?V
P-P
On Chip Clock and Reference
Low Power Dissipation - Typically Less Than 10mW
No Additional Active Circuits Required
Enhanced Display Stability
Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART NO. PART MARKING
TEMP. RANGE
(°C) PACKAGE PKG. DWG. #
ICL7106CPL ICL7106CPL 0 to 70 40 Ld PDIP E40.6
ICL7106CPLZ (Note 2) ICL7106CPLZ 0 to 70 40 Ld PDIP(Pb-free) (Note 3) E40.6
ICL7106CM44 ICL7106CM44 0 to 70 44 Ld MQFP Q44.10x10
ICL7106CM44Z (Note 2) ICL7106CM44Z 0 to 70 44 Ld MQFP (Pb-free) Q44.10x10
ICL7106CM44ZT (Note 2) ICL7106CM44Z 0 to 70 44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10
ICL7107CPL ICL7107CPL 0 to 70 40 Ld PDIP E40.6
ICL7107CPLZ (Note 2) ICL7107CPLZ 0 to 70 40 Ld PDIP(Pb-free) (Note 3) E40.6
ICL7107RCPL ICL7107RCPL 0 to 70 40 Ld PDIP (Note 1) E40.6
ICL7107RCPLZ (Note 2) ICL7107RCPLZ 0 to 70 40 Ld PDIP (Pb-free) (Notes 1, 3) E40.6
ICL7107SCPL ICL7107SCPL 0 to 70 40 Ld PDIP (Notes 1, 3) E40.6
ICL7107SCPLZ (Note 2) ICL7107SCPLZ 0 to 70 40 Ld PDIP (Pb-free) (Notes 1, 3) E40.6
ICL7107CM44 ICL7107CM44 0 to 70 44 Ld MQFP Q44.10x10
ICL7107CM44T ICL7107CM44 0 to 70 44 Ld MQFP Tape and Reel Q44.10x10
ICL7107CM44Z (Note 2) ICL7107CM44Z 0 to 70 44 Ld MQFP (Pb-free) Q44.10x10
ICL7107CM44ZT (Note 2) ICL7107CM44Z 0 to 70 44 Ld MQFP Tape and Reel (Pb-free) Q44.10x10
NOTES:
1. “R” indicates device with reversed leads for mounting to PC board underside. “S” indicates enhanced stability.
2. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
Data Sheet September 15, 2005
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.