NE5534A
Dual and single low noise op amp

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.

This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications.

• Audio equipment
• Instrumentation and control circuits
• Telephone channel amplifiers
• Medical equipment
SYMBOL
PARAMETER
RATING
UNIT
VS
Supply voltage
±22
V
VIN
Input voltage
±V supply
V
VDIFF
Differential input voltage1
±0.5
V
TA
Operating temperature range
SE
-55 to +125
°C
SA
-40 to +85
°C
NE
0 to +70
°C
TSTG
Storage temperature range
-65 to +150
°C
TJ
Junction temperature
150
°C
PD
Power dissipation at 25°C2
16D Pkg
1350
mW
16N Pkg
1500
mW
8D Pkg
750
mW
8FE Pkg
800
mW
8N Pkg
1150
mW
Output short-circuit duration3
Indefinite
TSOLD
Lead soldering temperature (10sec max)
300
°C
NOTES:
1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance:
8-pin ceramic DIP 150°C/W
8-pin plastic DIP 105°C/W
8-pin plastic SO 160°C/W
16-pin plastic DIP 80°C/W
16-pin plastic SO 90°C/W
3. Output may be shorted to ground at VS=±15V, TA=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating isnot exceeded.
• Small-signal bandwidth: 10MHz
• Output drive capability: 600W, 10VRMS at VS=±18V
• Input noise voltage: 4nV Hz
• DC voltage gain: 100000
• AC voltage gain: 6000 at 10kHz
• Power bandwidth: 200kHz
• Slew rate: 13V/ms
• Large supply voltage range: ±3 to ±20V

NE5007 T-1 3/4 Precision Optical Performance White LED NE5007F 250mA ULTRA-LOW DROPOUT POSITIVE VOLTAGE REGULATOR
NE5007N 2MMax, AV=>5 SINGLE, DUAL AND QUAD OVER-THE-TOP PRECISION RAIL-TO-RAIL INPUT AND OUTPUT OP AMPS NE5008 8-Bit high-speed multiplying D/A converter
NE5008BN SILICON POWER TRANSISTOR NE5008D 3-BIT 4:1 MULTIPLEXER
NE5008F NE5008N HR12 SERIES MINIATURE CIRCULAR DIN TYPE CONNECTOR
NE5008NB 2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP NE5008X CERAMIC CHIP/MIL-PRF-55681
NE5009 MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NE5009F
NE5009N Insulated Ultrafast Rectifier Module NE5018 8-Bit mp-compatible D/A converter
NE5018D CERAMIC CHIP CAPACITORS NE5018E Advanced Power MOSFET
NE5018F Quad PLL for DTV NE5018F/NO8 512K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory
NE5018N NE5018NB SPECIFICATIONS FOR LCD MODULE

Datasheet

Size: 109.98KB
Page: 8
PDF: NE5534A.pdf
  • Description:
    Dual and single low noise op amp
  • MFG:
    PHILIPS [Philips Semiconductors]
 

Abstract


Philips Semiconductors Linear Products Product specification
NE5533/5533A/
NE/SA/SE5534/5534A
Dual and single low noise op amp
114August 31, 1994 853-0222 13721
DESCRIPTION
The 5533/5534 are dual and single high-performance low noise
operational amplifiers. Compared to other operational amplifiers,
such as TL083, they show better noise performance, improved
output drive capability and considerably higher small-signal and
power bandwidths.
This makes the devices especially suitable for application in high
quality and professional audio equipment, in instrumentation and
control circuits and telephone channel amplifiers. The op amps are
internally compensated for gain equal to, or higher than, three. The
frequency response can be optimized with an external
compensation capacitor for various applications (unity gain amplifier,
capacitive load, slew rate, low overshoot, etc.) If very low noise is of
prime importance, it is recommended that the 5533A/5534A version
be used which has guaranteed noise specifications.
FEATURES
? Small-signal bandwidth: 10MHz
? Output drive capability: 600?, 10V
RMS
at VS=±18V
? Input noise voltage:
4nV Hz

? DC voltage gain: 100000
? AC voltage gain: 6000 at 10kHz
? Power bandwidth: 200kHz
? Slew rate: 13V/?s
? Large supply voltage range: ±3 to ±20V
PIN CONFIGURATIONS
8
7
6
54
3
2
1 BALANCE/ COMPENSATION
V+
OUTPUT
COMPENSATION
BALANCE
INVERTING INPUT
NON-INVERTING
V-
NE/SA/SE5534/5534A
D, FE, N Packages
1
2
3
4
5
6
7 8
9
10
11
12
14
13
NE5533/5533A
N Package
INV INPUT A
NON–INV INPUT A
BALANCE A
V–
BALANCE B
NON–INV B
INV B
BAL COMP A
COMP A
OUTPUT A
V+
OUTPUT B
COMP B
BAL COMP B
TOP VIEW
TOP VIEW
APPLICATIONS
? Audio equipment
? Instrumentation and control circuits
? Telephone channel amplifiers
? Medical equipment
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533N 0405B
14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533AN 0405B
8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534D 0174C
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534FE
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534N 0404B
8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534AD 0174C
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534AF
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534AN 0404B
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534N 0404B
8-Pin Plastic Small Outline (SO) package -40°C to +85°C SA5534AD 0174C
8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534N 0404B
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C SE5534AF
8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534AN 0404B
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534AN 0404B

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.