RTL8201CP
7.2】6.7 Square/Multiturn/Trimming Potentiometer

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

The RTL8201CP is a single-chip/single-port PHYceiver with an MII (Media Independent Interface)/SNI (Serial Network Interface). It implements all 10/100M Ethernet Physical-layer functions including the Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA), Twisted Pair Physical Medium Dependent Sublayer (TP-PMD), with an auto crossover detection function, 10Base-Tx Encoder/Decoder, and Twisted-Pair Media Access Unit (TPMAU).

A PECL (Pseudo Emitter Coupled Logic) interface is supported to connect with an external 100Base-FX fiber optical transceiver. The chip utilizes an advanced CMOS process to meet low voltage and low power requirements. With on-chip DSP (Digital Signal Processing) technology, the chip provides excellent performance under all operating conditions.

The RTL8201CP can be used for applications such as those for a Network Interface Adapter, MAU (Media Access Unit), CNR (Communication and Network Riser), ACR (Advanced Communication Riser), an Ethernet hub, and an Ethernet switch. In addition, it can be used in any embedded system with an Ethernet MAC that needs a UTP physical connection or Fiber PECL interface to an external 100Base-FX optical transceiver module.

Item
Minimum
Typical
Maximum
Supply Voltage
3.0V
3.3V
3.6V
Storage Temperature
-55°C
125°C
·Pin-to-pin compatible with the RTL8201BL
·Supports MII and 7-wire SNI (Serial Network Interface)
·10/100Mbps operation
·Full/half duplex operation
·Twisted pair or fiber mode output
·Auto-Negotiation
·Supports power down mode
·Supports operation under Link Down Power Saving mode
·Supports Base Line Wander (BLW) compensation
·Supports auto crossover detection (new RTL8201CP function)
·Supports repeater mode
·Adaptive Equalization
·Network status LEDs
·Flow control support
·25MHz crystal/oscillator as clock source
·IEEE 802.3/802.3u compliant
·Supports IEEE 802.3u clause 28; 1.8V
   operation with 3.3V IO signal tolerance
·is generated by an internal regulator
·0.18μm CMOS process
·48-pin LQFP package

RTL020P02 DC-DC Converter (-20V, -2.0A) RTL030P02 DC-DC Converter (-20V, -3.0A)
RTL030P02TR 6.2 & 6.55 Volt Temperature Compensated 6.2 & 6.55 Volt Temperature Compensated RTL035N03 2.5V Drive Nch MOSFET
RTL035N03TR 128K x8 bit Low Power and Low Voltage CMOS Static RAM RTL0605 16-BIT HIGH-INTEGRATION EMBEDDED PROCESSORS
RTL0610 80/60 Amp Automotive Plug-In / PCB Power Relay RTL0620 I2C-bus controlled economy PAL/NTSC and NTSC TV-processors
RTL0640 72-Mbit DDR-II SRAM 2-Word Burst Architecture RTL0660
RTL0805 RTL0810
RTL0820 Programmable Voltage Reference RTL0840 TV SOUND MPX FOR TWO CARRIER SYSTEM (INTRODUCTION)
RTL0860 METALLIZED POLYPROPYLENE FILM CAPACITORS RTL1005
RTL1010 3.3 V Zero Delay Clock Buffer RTL1020 LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR
RTL1030 9-LINE LVD ONLY SCSI TERMINATOR WITH INTEGRATED SPI-3 DELAY RTL1040 Micropower, 200 mA Ultra Low-Dropout Voltage Regulator with Programmable Power-On Reset Delay; Low Noise Version Available (LP2988)
Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.