SA20A
500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

SA2 585C Negative voltage regulators SA200 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
SA2000T Fiber Optic Contacts SA2002 Single Phase Bi-directional Power / Energy Metering IC with Instantaneous Pulse Output
SA2002H Single Phase Bi-directional Power / Energy Metering IC with Instantaneous Pulse Output SA2002HSA Single Phase Bi-directional Power / Energy Metering IC with Instantaneous Pulse Output
SA2003 SA2003A
SA2003P SA2003S SoftStore 8K x 8 nvSRAM
SA2005F Three Phase Bidirectional Power/Energy Metering IC with Instantaneous Pulse Output SA2005FSA Three Phase Bidirectional Power/Energy Metering IC with Instantaneous Pulse Output
SA2005MSA Pin Selectable Three Phase Power / Energy Metering IC for Stepper Motor / Impulse Counter Applications with Anti Tamper Features SA2006 Amplifier Transistors NPN Silicon
SA2006A 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface SA2007
SA2007A DSP CONTROLLERS SA200A GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
SA200A/CA Precision Micropower, Low Dropout Voltage References SA200CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Datasheet

Size: 313.64KB
Page: 4
PDF: SA20A.pdf
  • Description:
    500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
  • MFG:
    BYTES [Bytes]
 

Abstract


500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS SYMBOL VALUE UNITS
Peak Power Dissipation at T =25 C, T =1ms(NOTE 1) P Minimum 500 WattsA P PK
Steady State Power Dissipation at T =75 CL
Lead Length .375"(9.5mm) (NOTE 2)
FEATURES
MECHANICAL DATA
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load (JEDEC method) (NOTE 3)
Operating and Storage Temperature Range T , T -55 to +175 CJ STG
* 500 Watts Surge Capability at 1ms
1.0ps from 0 volt to BV min.
* High temperature soldering guaranteed:
length, 5lbs.(2.3kg) tension
260 C / 10 seconds / .375"(9.5mm) lead
* Typical I less than 1 A above 10VR m
* Fast response time: Typically less than

* Low zener impedance
* Excellent clamping capability
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
Weight: 0.40 grams*
VOLTAGE RANGE
5.0 to 180 Volts
500 Watts Peak Power
3.0 Watts Steady State
P 3.0 WattsD
I 70 AmpsFSM
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above T =25 C per Fig. 2.
2. Mounted on Copper Pad area of 1.6" X 1.6" (40mm X 40mm) per Fig.5.
3. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
A
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types SA5.0 thru SA180.
2. Electrical characteristics apply in both directions.
Dimensions in inches and (millimeters)
DO-15
1.0(25.4)
MIN.
1.0(25.4)
MIN.
.300(7.6)
.230(5.8)
.034(.9)
.028(.7)
DIA.
.140(3.6)
.104(2.6)
DIA.
SA5.0 SA180CATHRU
134

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.